Skip to content

<90 Family

Overview

The <90 family of Tracks can be used to create a 90 degree bend in a Track. They are currently available in 3 different sizes - [<90-D1], [<90-D2] and [<90-D3].

The sizes have been designed such that if you combine two Right tracks to form a closed loop, they generate polygons with a diameter whose inter-track spacing is 1, 2 and 3 units respectively.

This is the same standard of diameter that all other polygonal Tracks are also designed to.


Application Notes

Two <90 Tracks can also be combined to create an S shaped redirect as shown below. Multiple S Redirects can be combined to create a wiggle shape. This shape can be expanded to any aspect ratio by interspersing Straight Tracks of desired lengths.

Note

There is something noteworthy here!